Reinventing Aero Road Bikes
When you feel the stiffness of the STRADA frame combine with the comfort of its wider tires, it’s a totally unique experience. In addition, you sense the speed that comes from a no-compromise focus on aerodynamics: airfoil shapes designed specifically around these wider tires, a 1x drivetrain and the tight clearances reminiscent of the fastest time trial bikes. If you like to lead from the front, the STRADA is your ticket to get there first.
The biggest factor in road bike comfort are the tires; they provide more compliance than any other part of the bike. Wider tires are better at reducing shocks from cracks, curbs, cobbles and potholes, which is why they are the norm at Paris- Roubaix. Wider tires also have lower rolling resistance, because their shorter contact patch requires less bending by the casing.
In addition, wider tires offer an advantage on long and multi-day rides, reducing the steady drain on a rider’s energy level caused by high-frequency road buzz. But aerodynamics are also important on such rides, and wide tires tend to test poorly in the windtunnel. However, that is to be expected if you test them with frames and parts optimized for narrow tires. The STRADA is the first aero road frame optimized for wider tires, so finally you can be fast and comfortable all the time, from the cobbles to the climbs. All day, every day, with one and the same bike.
With all aero road bike developments of the past 20 years, the drivetrain was never really tackled. So we did. The worst area aerodynamically is around the BB, with the frame, crank, chainrings, front derailleur, water bottles and rider’s legs leaving little room for the air to pass through. A single ring drivetrain eliminates the front derailleur and one chainring, reducing frontal area, creating space for unobstructed airflow and freeing up the design of the seattube to shield the rear wheel even better (no front derailleur mount needed). And with modern cassettes (in particular the special 3T cassette coming soon), you still have all the gears you need.
Think about it, 30 years ago we had 12 gears (2x6) of which only 8 were unique (the rest overlapped). Now we’re at 2x11, always assuming that more is better. But did the “improvement” from 2x10 to 2x11 really make that much of a difference? Sometimes more is not better, it’s just more; more weight, more drag, more gear overlap and more complexity. So instead of 2x11 with 14 effective gears, a front derailleur, a second ring and a second shift lever, 1x11 gives you the gears you need, the range you need, fewer components, less weight, less drag and less hassle.
At 3T we design for real world aerodynamics at realistic speeds. Sometimes that clashes with conventional wisdom, even on something as fundamental as aero tube design. Aero tubes are designed based on a series of flat 2D cross sections that connect together into a tube shape. But in the real world, the air flowing over a tube doesn’t follow a flat path, it follows an arc. So we built our Arcfoil tubes as a series of curved instead of flat Sqaero cross sections. These exactly mimic the arc of the actual airflow at several points along the tubes and substantially lower the drag (the arc of the downtube logo pays hommage to exactly the airflow and cross section arc there).
The Sqaero airfoil sections of the seatube arc for a different reason, to perfectly cover the rear tire and reduce the turbulence. Seatpost, headtube, even the seatpost clamp and dropouts are optimized aerodynamically in sometimes unexpected ways based on our real world analysis (for example you may wonder why the area behind the lower headset isn’t faired; the answer is simple, because the air doesn’t flow horizontally there but spins off the front wheel almost vertically, so a horizontal fairing shape is counterproductive as it blocks the upward airflow).
MINIMALIST CROWN: Instead of a bulky, unaero crown, we minimize its size. This improves the crown’s aerodynamics and moves the front wheel closer to the downtube, creating a perfect transition for the airflow.
SQAERO FORK LEGS: The Sqaero fork airfoil only has a small truncation, perfect to guide the airflow around the front wheel and boost fork stiffness. Different left & right profiles are used to counteract braking forces.
INTEGRATED ADAPTOR: The Fundi supports flat mount disc brakes with 140/160mm rotors. The disc adaptor to switch between 140 and 160 is completely integrated into the left fork leg shape.
MIND THE GAP: A smooth transition of the airflow from front wheel to downtube and from seattube to rear wheel is crucial to lowering drag. The STRADA minimizes these gaps while respecting the UCI rules.
AEROFLEX: Bike frames are inherently stiff vertically, and the right tires offer much more comfort than a frame ever can. But we eke out a few last percent with our extremely thin (=aero & comfortable) seatstays.
DISC BRAKE ONLY: We don't want to compromise weight, stiffness and aerodynamics by combining disc & rim brake versions in one frame platform, so everything on the STRADA is fully optimized for flatmount disc brakes only.
HIDE-RATION: The STRADA downtube is shaped to hide the water bottles from the airflow. The fastest set-up is one bottle low on the downtube, the “team-leader” configuration. Second-fastest set-up is with two bottles.
MAGNUS AT THE CLASSICS: 2004 Paris-Roubaix winner Magnus Backstedt and his daughter Elynor ride the cobbles of Roubaix, the Kapelmuur and the Mur de Huy.
MAGNUS REVISITS 1986 TOUR: Magnus and Elynor ride the legendary Briancon-Alpe d'Huez stage of the 1986 Tour (LeMond vs. Hinault).
MAGNUS’ ICONIC GIRO CLIMBS: Magnus and Elynor ride the famous Giro climbs of Stelvio, Gavia, Val Mortello and Kronplatz.
AQUA BLUE & 3T INTRO: Introducing the world's first pro team racing with a 1x drivetrain on their 3T STRADA.
AQUA BLUE ON 1X: Larry Warbasse, US Road champion, about racing at the pro level on a STRADA with 1x drivetrain.
AQUA BLUE ON DISC BRAKES: Larry Warbasse, skeptical about disc brakes, discusses this new setup on his STRADA.
|Frame material||Unidirectional carbon|
|Frame weight (+/-3%)||970g|
|Fork weight (+/-3%)||395g|
|Fork||Fundi TEAM with custom Syntace X-12 thru-axle 100x12mm (included)|
|Headset||1 1/4 - 1 1/8 Integrated tapered IS42/28.6 | 47/33|
|Seatpost||3T Charlie Sqaero Strada (CHARLIE EXPLORO is NOT compatible with the STRADA frame)|
|Rear axle||Custom Syntace X-12 thru-axle 142x12mm (included)|
|Front brake||Flatmount integrated for 140 & 160mm disc|
|Rear brake||Flatmount for 140 & 160mm disc|
|Cable routing||Internal via interchangeable FlipTop covers for 1x11 machanical, Di2, eTap|
|Tire clearance||Effective width: 28mm, Wheel radius: 344mm (wheel radius)|
|Finish||Stealth black or red with white logos. Ready-to-paint frames also available|
|Included in box||Frame, fork, headset, seatpost, seatpost internal clamp, front and rear thru axle, 2 rear derailleur hangers, noise-cancelling foam sleeve for rear derailleur housing and brake hose|
The STRADA PRO FORCE complete bike takes full advantage of the STRADA features. SRAM is the world leader in 1x drivetrains and the FORCE 1x groupset is flawless. Additional features include the power meter-ready crankset and Discus C35 PRO aero train/race wheels (we spec the “25mm” labeled tires because they fit much wider on the rim so the combination is perfect).
|Fork||3T FUNDI PRO at mount disk brake w/12mm thru axle|
|Handlebar||Aeronova Team Stealth|
|Headset||2 x 10mm & 2 x 5mm PC headset spacers|
|Grips||3T Corius PRO BLACK with 3T bar end plugs|
|Shifters||SRAM Force CX1 Hydraulic DoubleTap|
|Rear Derailleur||SRAM Force CX1 Type 2.1 Medium Cage|
|Crankset||SRAM Quarq Prime Power Ready BB386 w/ 30mm 7050 AL spindle|
|Chainring||SRAM Force XSYNC, 50T, 110mm BCD|
|Bottom Bracket||Aluminum / Nylon Press fit cups for BB386EVO with 30mm i.d. sealed cartridge bearings|
|Chain||SRAM 11-speed XX1 Powerchain® II with PowerLock® connecting link|
|Freewheel / Cassette||SRAM 11-speed PowerGlide™ 11-36T|
|Brake Levers||SRAM Force CX1 Hydraulic DoubleTap|
|Front Brake||SRAM Force Flat Mount Hydraulic Disc w/ SRAM CenterlineX 160mm Centerlock rotor|
|Rear Brake||SRAM Force Flat Mount Hydraulic Disc w/ SRAM CenterlineX 160mm Centerlock rotor|
|Cables||SRAM Hydraulic brake & derailleur with SRAM sealed housing|
|Saddle||Sella San Marco Aspide 2 Full Fit Dynamic Narrow 2018 277mm x 132mm|
|Rims / Wheelset||Discus C35 PRO (700c)|
|Front Hub||Light Oversize Aluminum with adjustable bearing pre-load, Centerlock brake rotor mount configured for 12mm x 100mm O.L.D. Thru Axle|
|Rear Hub||Light Oversize Aluminum with adjustable bearing pre-load, Centerlock brake rotor mount, Aluminum Shimano/SRAM 11 speed freehub, configured for 12mm x 142mm O.L.D. Thru Axle|
|Spokes||Pillar 1425 Straight pull, stainless steel, black finish, double butted, 24F/24R|
|Tires||Continental Grand Prix 4000 S II 700c x 25c; BlackChili compound or Pirelli P Zero™ Velo 700 x 25c|
|Accessories||Cable clip, sealed ferrules, Maxxis Superlight inner tubes, reflector kit|
|Weight (Complete bike)||7.9 Kg +/- 3% (M Size)|